When to check
- At the start of every shift, before the truck is used.
- Again whenever a different operator takes the truck over.
- Write the result down every time, even when everything passes.
Forklift pre-use checklist
| Truck / fleet no. | Date | ||
|---|---|---|---|
| Operator | Shift |
With the truck switched off
| Check | What to look for | OK | Fault |
|---|---|---|---|
| General condition | Damage to the body, guards or panels. Puddles under the truck: oil, hydraulic fluid, coolant or battery acid. | ||
| Tyres and wheels | Cuts, chunks missing, uneven wear, wheel nuts. Pressure on pneumatic tyres. | ||
| Forks and carriage | Cracks, bends or wear at the heel. Fork locking pins in place. | ||
| Mast, chains and hoses | Chains evenly tensioned, lubricated and not stretched. Hydraulic hoses not leaking, chafed or kinked. | ||
| Overhead guard and load backrest | Secure and undamaged. | ||
| Seat and seat belt | Seat secure; belt or operator restraint undamaged and latching. | ||
| Fluids and power | Engine oil, hydraulic oil, coolant and fuel on IC trucks. Battery charge, connectors and cables on electric trucks. LPG cylinder secure, valve and hose undamaged. | ||
| Capacity plate | Present and readable, and right for any attachment fitted. | ||
| Mirrors, lights, beacon | Clean, secure and working. |
With the truck running
| Check | What to look for | OK | Fault |
|---|---|---|---|
| Horn and reversing alarm | Both sound. | ||
| Steering | Smooth, with no excess play or noise. | ||
| Service brake | Pedal firm; truck stops smoothly. | ||
| Parking brake | Holds the truck. | ||
| Hoist, lower and tilt | Raise to full height and lower fully: smooth, no jerks, no unusual noise. Tilt both ways. Test any attachment. | ||
| Instruments and warning lights | Gauges working; no warning lights left on. | ||
| Anything unusual | Noise, vibration, smell or handling that is not normal for this truck. |
| Faults found | |||
|---|---|---|---|
| Reported to | Signature | ||
Checklist from liftx.co.uk/forklift-daily-checks/ · LiftX, Ferndown · 07970 088840
If a check fails
Do not use the truck if the fault affects safety: brakes, steering, forks, chains, the mast, tyres or a leak. Take the key out, report it to your supervisor and label the truck out of use until it has been repaired. A trained operator is the last line of defence here; seewhat forklift training involves.
Daily checks are not a Thorough Examination
A pre-use check is the operator's look over the truck. A Thorough Examinationunder LOLER is a separate, legal inspection by a competent person of the lifting parts: the chains, forks, mast and cylinders and any attachments. HSE sets it at least every12 months, or every 6 months if the truck is used to lift people, unless an examination scheme drawn up by a competent person sets other intervals. Brakes, lights and the rest are covered by regular servicing.
We carry out servicing and maintenance and can arrange Thorough Examinations; see our after-sales support, or call07970 088840.
Source: HSE, Thorough examinations of lifting equipment (read 2 November 2026). General guidance: follow the manufacturer's handbook for your truck.